spacer.png, 0 kB
  
spacer.png, 0 kB
DSI Partners
Team_Nisca_Logo Evolvis_Logo HID_Logo Magicard_Logo Datacard_Distributor_Logo Fargo_HID_Logo ExchangeIT_Logo Zebra_Logo


125 kHz MultiProx Reader
Click image above for more info





125 kHz MultiProx Reader




Product ID: 5385

  • Cost effective replacement and upgrade of existing Schlage/Westinghouse (WSE) systems without replacing existing WSE cards and installed coax wiring.
  • Simultaneously reads both HID and most WSE analog proximity cards. Provides HSM to replace WSE systems? MSM.
  • Base part numbers: Controller - 6000, Reader - 5385, HSM Board - 6020.

Features

  • Installation:
    The MultiProx reader directly replaces existing Schlage/Westinghouse access control equipment without replacing any existing cabling.
  • Cost effective:
    The MultiProx reader is quick and easy to install. Meet expanding card requirements with the introduction of low-cost, HID proximity cards to existing Schlage access cards populations.
  • Mounting:
    The MultiProx reader directly replaces the existing Schlage sensor. No modifications to existing mounting hardware, mounting holes and cable locations are required.
  • Audiovisual indication:
    When a proximity card is presented to the reader, the red LED flashes green and the beeper sounds. The multicolor LED and beeper also can be controlled individually by the host system.
  • Indoor/outdoor design:
    The MultiProx reader is sealed in a rugged, weatherized polycarbonate enclosure designed to withstand harsh environments as well as provide a high degree of vandal resistance.
  • Easily interfaced:
    The MultiProx reader interfaces with all existing Wiegand protocol access control systems. The facility code and card numbers of the Schlage cards are represented in a 26-bit or 32-bit Wiegand format.
  • Warranty:
    All MultiProx reader components are warranted against defects in materials and workmanship for life from date of shipment. (See complete warranty policy for details.)

Specifications:

  • Typical maximum* read range
    o ProxCard® II card up to 3" (7.5 cm)
    o ISOProx® II card up to 2" (5 cm)
    o Schlage card up to 2" (5 cm)
    *Depending on local installation conditions.
  • Dimensions
    o 7.5" x 7.5" x 0.8" (19 x 19 x 2 cm )
  • Maximum Current Requirements
    o DC Current at 24V: Avg. 50 mA (Powered by the controller)
  • Operating Temperature
    o -22° to 150° F (-30° to 65° C)
  • Operating Humidity
    o 5-95% relative humidity noncondensing
  • Weight
    o 15 oz. (426 gm)





Ask a question about this product

Browse Products by Manufacturer
spacer.png, 0 kB
  |  (866) 988-4545  |  Reseller Application  |  News & Events  |  Downloads  |  Site Map  |  
spacer.png, 0 kB
 
Copyright © 2008 - Digital Supply International - All rights reserved.
download components joomla modules free joomla templates