125 kHz ProxPro with Keypad Reader

• Ideal for medium-range applications.
• Available with Wiegand, Serial (RS-232/RS-422) or Clock-and-Data interface.
• Sealed for indoor or outdoor use.
• Optional glass mount kit available for mounting the reader behind glass.
• Available in gray or beige.
• Keypad data and card data can be sent on the same cable, or on a separate cable using 2 of 7 or 3 x 4 matrix.

• Affords high reliability, consistent read range characteristics, and low power consumption in a single, easy-to-install package.
• Features multicolor LED, internal or host control of the LED, and/or beeper and a beeper "off" switch for silent operation.
• Provides Wiegand protocol interface compatibility with all standard access control systems.
• Offers an optional, fully integrated personal identification number keypad for heightened security. Can be mounted to glass (using the optional glass mounting kit).

• Typical maximum* read range
  o ProxCard® II Card - up to 8" (20 cm)
  o ISOProx® II Card - up to 7" (17.5 cm)
  o DuoProx® II Card - up to 7" (17.5 cm)
  o Smart ISOProx® II Card - up to 7" (17.5 cm)
  o Smart DuoProx® II Card – up to 7" (17.5 cm)
  o HID Proximity & MIFARE® card – up to 7" (17.5 cm)
  o ProxCard® Plus Card - up to 3" (7.5 cm)
  o ProxKey® II Keyfob - up to 3" (7.5 cm)
  o MicroProx® Tag – up to 4" (10.2 cm)
  o ProxPass® Active Vehicle Tag – N/A
  *Depending on local installation conditions.
• Dimensions
  o 5.0" x 5.0" x 1.0" (12.7 x 12.7 x 2.54 cm)
• Power Supply
  o 10-28.5 VDC; Linear power supplies recommended. Reverse voltage protection included.
• Maximum Current Requirements
  o Average: 100 mA (12 VDC)
  o Peak: 120 mA (24 VDC)
• Operating Temperature
  o -22° to 150° F (-30° to 65° C)
• Operating Humidity
  o 0-95% relative humidity noncondensing
• Weight
  o 12 oz. (336 gm)
  
• Cable Distance
  o Wiegand or Clock and Data interface: 500 feet (152 m)
  o RS-232 interface: 50 feet (15 m)
  o RS-422 interface: 4000 feet (1219 m)
  o Recommended cable is ALPHA 1295 (22 AWG) 5 conductor stranded with overall shield or equivalent.
  o Additional conductors may be required for LED or beeper control. RS-422 requires ALPHA 6212C 2-Twisted Pair, shielded cable with drain wire, or equivalent for data, plus ALPHA 1292C two-conductor shielded or equivalent for DC power.
• Certifications
  o Canada/UL 294 Listed: Access Control System Units
  o FCC Certification, United States
  o Canada Certification
  o CE Mark, Fifteen EU Countries under the R&TTE
  o Directive (EN60950 - ITE Electrical Safety, EN 300 330 - SRD, and ETS 300 683 - EMC)
  o IEC60950, ITE CB Scheme Electrical Safety
  o Australia C-Tick Mark, New Zealand EMC, China
  o Taiwan (5355 only)